Main features
New for 2019 we have introduced new variant heaters with AISI-316 SS 2.25″BSP 1kW stainless-steel screwplugs. These stock item will suit customers in the food industry or brewing who require all wetted parts to be stainless steel, and we hope that at a tickle under a meter, they will fit in most industrial vessels.
- Incalloy 800 sheathed elements, A superior stainless steel, well suited to water in the UK.
- AISI-316 SS 2.25″ BSP screwplug.
- AISI-316L SS thermostat pocket 18″ or 460mm.
- Plastimid 6 IP65 terminal box, 4 Phillips screws & rubber sealing ring.
- M32 (huge) cable entry glands + 2 blind ports if needed (PG16 & PG9)
- 980mm immersed length, measured from bottom of screwplug, 1024mm if measuring from above thread, all ±10mm.
- M5 terminal pins, nuts & washers.
- 1kW 240v single phase – 3 elements in series – 7w/in² – heavy industrial oils
Products In Range
27kW Stainless-Steel Screwplug Immersion Heater: PCSS27KW
9kW Stainless-Steel Screwplug Immersion Heater: PCSS9KW
1kW Stainless-Steel Screwplug Immersion Heater: PCSS1KW
Other Immersion Heater Ranges
Screwed Immersion Heaters
- Heavy Duty Industrial Immersion Heater – PIH Range (4.5kW to 24kW).
- Industrial Immersion Heater – PII Range (1kW to 24kW).
- Calorifier and Brewery Heater – PCAB Range (9kW to 18kW).
- Brewery Immersion Heater – PIB Range (Any Kw Rating)
- Oil Heater Range – POIL Range (750W–4.5kW).
- Removable Brewery Immersion Heater PIR Range (up to 30kW).