Brewery Immersion Heater PCAB

Brewery Immersion Heater.

Specifically designed for the brewing industry by our technical team, our PCAB range of Brewery Immersion Heaters features:

  • Well spaced elements which are only U bent, to allow good access for cleaning, see pictures 1, 3 & 9 on the right.
  • Available as 3kW, 6kW, 9kW, 12kW, 18kW, see below for specifics.
  • Terminal box 120mm deep, 120x100mm oval.
  • ABS IP65 terminal enclosure rotateable through 360 degrees.
  • 415v only due to kW ratings.
  • 2.25″ BSP Brass Screwplug.
  • 10mm diameter Incoloy 800 elements.
  • complete with 18″ thermowell.
  • Italian manufactured.
  • Busbar can be reconfigured to make single phase oil imersion heaters.
Product code kW volt length mm COLD mm diam mm W/IN2
PCAB3 3 415 330 150 10 60
PCAB6 6 415 500 150 10 61
PCAB9 9 415 575 150 10 65
PCAB12 12 415 830 150 10 57
PCAB18 18 415 990 150 10 69

Get a brewery immersion heater quote

…or ring Jamie on 01827 703228 to discuss your requirements. Having spoken to many brewers, indeed it does seem to be the only growth industry in this fine country of ours at the moment, we have learned that everybodies applications and needs are different. Some aspects of the process are common, such as the need to get water from one part of your process at 70ºC, up to the boil as quickly as possible. This demand for kW of power is usually balanced with a maximum immersed length of about 1m. The more element we can squeeze into the available space, the more we are able to reduce the watt density of the elements. Have a look at our Blog entry, in which I have tried to explain the importance of watt density and its relevance when choosing and using a brewery immersion heater.

Other Immersion Heater Ranges.