Industrial Immersion Heater PII Range

Industrial Immersion Heaters

Our PII Industrial Immersion Heater features

  • STOCK Industrial Immersion Heater.
  • 2.25″ BSP.
  • 3kw, 6kw, 9kw, 12kw, 15kw, 18kw, 24kw.
  • One cable entry M25 (two available as an option).
  • Terminal covers rotateable through 360 degrees to allow cable entry position to be chosen.
  • Alloy IP67 terminal enclosures. Measuring 120mm diameter x 105mm height.
  • Incoloy 800, “a superior stainless steel”, 8mm diameter elements.
  • Complete with thermowell.
  • See the table below for full details, dimensions, specific watts densities, etc.
  • BESPOKE Industrial Immersion Heaters.
  • Available at any kW loading from 500w up to 24kW.
  • 1.25″, 1.5″, 1.75″, 2″, 2.25″ and 2.5″ screwplug sizes are available in brass.
  • 2″ and 2.25″ BSP also available in stainless steel.
  • Available with 1 or 2 thermowells for thermostats / cutouts,
  • Or available with no thermowell if specified by the client.
  • Bespoke heaters are usually available with a 5-10 day leadtime.
  • This lead time can be reduced for the customer in a hurry, for an agreed premium cost.
Product code kW volt length mm COLD mm diam mm W/IN2
PII3 3 240/415 300 150 8 42
PII6 6 415 450 150 8 42
PII9 9 415 550 150 8 50
PII12 12 415 600 150 8 55
PII18 18 415 845 150 8 56
PII24 24 415 1100 150 8 53

Get an immersion heater quote

…or call Jamie on 01827 703228 to discuss your Industrial Immersion Heater needs. Whilst the “Contacts” forms serve a purpose, there is no substitiute for a telephone conversation, perhaps supplemented with a photograph or two to jamie@nullprocessheatingservices.com.  Everybody’s applications is different, and we take a pride in getting everything right first time. The best way to achieve this is through a two way discussion. We look forward to helping you address your requirements.

Other Immersion Heater Ranges.

One Response to Industrial Immersion Heater PII Range

  1. […] shortest, where elements are going through ducting for air heaters. When 2″ colds are used on immersion heaters, 1″ is lost in the screwplug and terminal box, leaving only 1″ cold on the wet side. […]